ES335

Model based on plan and original models in hand.
There are many variations of this model depending when they are made or they year.
So this model received adaptations from what was better or easier to make on CNC for expert and beginners.
As these old guitars were made in a little different way depending on the year and the factory, the available model is a synthesis of what I thought was a better adaptation for CNC machining and also for aesthetics and practicality.

SPECS
Nut 42.80mm - 1.685"
12 fret 53.7mm - 2.11"
Scale 628mm - 24.72"
Neck angled: 4.5º neck
16.5º headstock
Files with two different types of internal cavity

===================================================
THE FILES WILL OPEN ONLY ON VCARVE OR ASPIRE 11
===================================================

This guitar was based on a 2D plan.
3DCNCGUITARS buy good plans on the internet to convert them into 3d guitars to be machined on CNC, but these plans are closer to the guitars but not an exact copy from the original models.
Also because old guitars are hard to find one that matches with another, except after 90´ models.
The guitar files have their dimensions and aspects are very close to the originals but do not think that you will buy this file and take from the CNC an exact model as the original one.
The files already contain simplified toolpaths. So you can use them as a starting point for your own toolpaths.

============================
Copyright
============================
3DCNCGUITARS / NBSDESIGN are the authors of this file.

Images from Moi3d